01
Accuracy and repeatability
Parts are cut from a digital profile, so the hundredth matches the first. That matters when components have to fit a welded assembly or bolt to existing equipment.
Home › Laser cutting
Accurate, repeatable profiles cut straight from your file — for machinery, process equipment and general fabrication work.
The process cuts clean profiles directly from flat material, giving tight tolerances and square edges without the tooling costs that come with punching or stamping.
Whether cutting is the whole job or the first stage of a larger fabrication, we review the drawing, the material and what the part has to do before confirming the best approach.

A focused beam melts and vaporises material along a programmed path, with an assist gas clearing the cut.
Because the cut follows a digital profile rather than physical tooling, complex shapes, internal cut-outs, slots and hole patterns can be produced without the lead time and expense of making tools.
The result is a precise, repeatable component with a clean edge and minimal distortion — suited equally to one-off parts and repeat production batches.
Six reasons laser cutting earns its place on one-off and low-volume industrial jobs.
01
Parts are cut from a digital profile, so the hundredth matches the first. That matters when components have to fit a welded assembly or bolt to existing equipment.
02
Changing a design means changing a file, not making a tool. Prototypes, low volumes and bespoke work become economic.
03
A square, clean edge often needs little or no dressing before welding or assembly, which takes handling out of the downstream process.
04
Internal cut-outs, narrow slots, tight radii and hole patterns are produced in one operation that would be difficult by conventional cutting.
05
Parts nest closely across the sheet, making better use of material and reducing offcut waste on larger batches.
06
Cutting directly from your file shortens the path between design and finished component, which shortens the whole project.
The kind of parts used throughout fabricated machinery and process equipment.
Material grade, thickness and surface condition all affect the cut quality achievable, so each job is assessed before cutting. Where a component will be welded, formed or finished afterwards, we plan the cut around that.

Most parts still need forming, welding, assembly or a finish. All of that happens in the same workshop, which is usually the difference between a part and a finished component.
Cut profiles folded, rolled and welded into the assembly they belong to.
An even matt or satin finish across the finished assembly.
Or the cut parts go straight into equipment we are building for you.
Four things get you an accurate price rather than an estimate.
01
A drawing, DXF or CAD file of the component.
02
Type, grade and thickness, and the quantity you need.
03
Any dimensions that are critical to fit or function.
04
Whether forming, welding or finishing is also needed, and any hygiene or coating requirement.
A DXF, a CAD file or a dimensioned drawing is enough for us to come back with a price.