Vibrating equipment FAQs
How vibratory conveyors, feeders, screens and separators work, what they can handle, and how they are specified, installed and maintained.
The basics
What is a vibratory conveyor?
A vibratory conveyor moves bulk material along a trough using vibration rather than a belt or chain. Because nothing runs through the product path, it suits fragile products that would be damaged by transfer points, and abrasive products that would wear a belt out.
How does vibrating equipment actually work?
A drive imparts motion to a trough, bowl, tube or table. That vibration transfers energy to the material, which makes it move along, stratify or settle. Frequency and amplitude are tuned to the specific product; the same machine set differently will convey, screen or compact.
What is the difference between a conveyor, a feeder, a screen and a separator?
They share the same principle and differ in duty. A conveyor moves product from A to B. A feeder meters it at a controlled rate into the next machine. A screen grades material by size through screen media. A separator divides material by size or density, including solids from liquids. Many installations use more than one.
Which industries use this equipment?
Food processing, animal feed, recycling, plastics, chemicals, foundry, agriculture, construction materials and general bulk handling. Each sector brings its own standards, hygiene and wash-down in food, wear resistance in foundry and recycling, and those shape the build.
What are the main benefits over a belt conveyor?
No belts or chains in the product path, so less to wear and less to clean. Gentler, more controlled movement that protects fragile product. And in the case of a spiral elevator, a far smaller footprint than an incline conveyor achieving the same lift.
Specifying a machine
How do I choose the right machine for my application?
It comes down to the product's characteristics, the throughput you need, the cleanliness standard you work to and the footprint available. Send us those four things and we will tell you what the machine needs to be, including when the answer is that vibration is not the right approach.
What determines the length and width of the machine?
Required throughput, the residence time the duty needs, and the space available. We size the pan, trough or deck from calculation and from what has worked on comparable duties, rather than scaling a standard model.
What are typical load capacities?
Capacity depends on size and design; some configurations convey two to three times their own empty weight. Rather than work from a general figure, we engineer each system to the specific load and flow rate required.
Can equipment be custom-designed around an existing process?
That is the normal case for us. We design around your existing footprint, infeed and discharge heights, and the machines either side of the new one. The equipment adapts to the line, not the other way round.
Can the machine convey at an incline or decline?
Most vibratory conveyors run horizontally, and shallow inclines are achievable. The product's shape and friction set the practical angle, and increasing stroke or pan width can offset the capacity lost. For significant height change, a spiral elevator is usually the better answer.
Can the direction of flow be reversed?
Many configurations can be set to move material either way, by reversing motor rotation or by using reversible drives. It needs to be specified up front, because it affects the drive selection.
Materials and product handling
What materials can be processed?
Powders, granules, small parts, food products, pellets, grains, sand, castings and formed components. Abrasive materials are handled too, provided the machine is designed for it with wear-resistant liners and finishes.
Can the equipment handle abrasive materials?
Yes, with the right construction. Wear-resistant materials such as Hardox, appropriate liners and a design that reduces contact all extend service life considerably on abrasive duty.
How do you avoid damaging fragile product?
Gentle vibration and controlled motion reduce impact. Where product tends to shingle or stack, de-shingling ramps and aligning lanes can be built in to keep pieces separated and intact through the transfer.
Can the equipment be enclosed to control dust or contamination?
Yes. Covers, enclosures or fully sealed tubes can be fitted to contain dust, isolate the product, or maintain an inert atmosphere where the process requires it.
What construction materials do you build in?
Stainless steel, mild steel and aluminium as standard, with Hardox for abrasive duty and super duplex stainless for highly corrosive or marine environments. Grade and finish are selected against the product and the wash-down regime.
Installation, cleaning and maintenance
How is the equipment installed and supported?
It is mounted on isolation springs or pads to absorb vibration and protect the surrounding structure. We supply detailed instructions and can supervise installation to make sure alignment and support are right from the start.
What maintenance does it need?
Regular inspection of springs, bearings and drive units, lubrication, and checking fasteners for tightness. We design for access, because maintenance that is awkward to reach is maintenance that does not get done.
How is it cleaned, and is it suitable for food processing?
Machines for food duty are built with smooth, one-piece troughs and minimal crevices so they can be cleaned properly. Stainless construction and clean-in-place arrangements are specified where the hygiene standard requires it.
Can one machine have several inlets or discharge points?
Yes. Multiple inlets and outlets with adjustable gates or valves can be incorporated, so material can be fed from different sources or discharged at several points along the length.
Can it meter or batch product?
By combining drive speed control with gates, the machine can meter flow and, in some arrangements, act as a self-discharging storage unit feeding a weigher or a downstream process.
Drives, controls and safety
What drive systems do you use?
Electromagnetic drives for smaller, precise applications, and electromechanical drives for larger loads. The choice follows from the force required, the degree of control needed and the maintenance preference on site.
How is the speed or flow rate controlled?
Through the drive's speed or amplitude, and through adjustable gates. Variable-speed drives allow the rate to be trimmed without stopping production, which matters on lines that run several products.
Are variable speed drives available?
Yes. Variable-frequency drives give precise control over amplitude and speed, so flow rates can be adjusted as production requirements change rather than being fixed at commissioning.
Can it be integrated with plant automation?
Sensors, PLC control and remote monitoring can all be fitted, and the equipment can be integrated with existing plant automation so vibration settings can be adjusted in real time alongside the rest of the line.
What safety features should be included?
Guards, emergency stop circuits, vibration isolation and condition monitoring sensors, specified against the relevant safety standards and the risks of the particular installation.
How energy efficient is vibrating equipment?
With no belts or chains to drive and the ability to run at variable speed, vibratory systems compare well. Proper tuning matters most; a machine running at the right amplitude for its duty wastes far less energy than one simply set to maximum.
Still not sure what you need?
Tell us the product, the throughput and the space you have. We will tell you what the machine needs to be.